Icom Logo

Icom F3210DEX - F4210DEX Series Intrinsically Safe IDAS™ Portable Two Way Radio

$1,250.00 each
MhZ Version

+

Safe and reliable communications is a must in potentially explosive atmospheres. The F3201DEX series operates in both analog and IDAS digital modes and can be used with any existing analog two-way radios. Digital functions include multi-site conventional and Type-D single site trunking. These IDAS radios include a 15-bit digital voice scrambler and voting scan for multi-site conventional operation. The F3201DEX series should be your radio choice for use in hazardous environments.

STANDARD PACKAGE INCLUDES
Antenna (FA-SC55V or FA-SC57U)
Battery (BP-227EX)
Belt Clip (MB-94EX)
Charger (BC-212EX)
Owner’s Manual
Warranty: 2 years

Features

Channels:

16 channels

Output Power:

1W

Frequencies:

136-174 MHz, 440-470 MHz

Waterproof Rating:

IP67

Programmable Keys:

3

ATEX (Atmospheres Explosibles) European Standard

EX - intrinsincally iafe logo - Icom f3201dexThis is the European Union directive to which all two-way radios must adhere if used in potentially explosive environments. ATEX and IEC have technically identical standards for electrical equipment since 2006. The F3201DEX series will provide some of the highest ATEX Gas, Dust and Mining Protection.

Safety Features

The F3201DEX series has a number of built-in safety features in analog mode. The lone worker function detects when the radio is not operated for a preset period and a beep sounds requiring the user to push a button. If no button is pushed within the preset time, an emergency signal automatically transmits and alerts co-workers or dispatcher. The man down function sends an emergency signal if left in a horizontal position.

In both analog and digital mode, the user can program the red Emergency button to send an emergency tone when pushed.

Other Features

  • Channel announcement
  • 2-tone, 5-tone, CTCSS and DTCS built-in for analog mode
  • MDC1200 PTT ID and emergency transmission
  • DTMF autodial
  • Low electrical resistivity body

Specifications

General

Frequency coverage

F3201DEX
136–174MHz
F4201DEX
400–470MHz
Number of channels 16 channels
Type of emission 11K0F3E, 8K50F3E, 4K00F1E/F1D
Channel spacing 12.5 / 6.25 kHz
Power supply requirement 7.4V DC nominal
Current drain
  Tx High (VHF)
  Rx Max. audio/standby
F3201DEX
550mA
300mA (Internal SP)/110mA
F4201DEX
550mA
300mA (Internal SP)/110mA
Antenna impedance 5OΩ
Operating temperature range
–20°C to +55°C; –4°F to +131°F
Dimensions (proj. not included) 63×144×50 mm; 2.48×5.67×1.97 in (With BP-277EX)
Weight
F3201DEX
258g; 9.1 oz (Radio only)
466g; 1.03 lb (With MB-94EX,
BP-277EX & FA-SC55V)
F4201DEX
250g; 8.8 oz (Radio only)
460g; 1.01 lb (With MB-94EX,
BP-277EX & FA-SC57U)
Transmitter
Output power (at 7.4V DC) 1W, 0.8W, 0.6W (Hi, L2, L1)
Max. permissible deviation ±2.5kHz (Narrow)
Frequency stability
±1.0ppm
Spurious emissions 66dB min.
FM harmonic distortion 
F3201DEX
46dB typ. (Narrow)
F4201DEX
40dB typ. (Narrow)
Audio harmonic distortion 1.5% typ. (Narrow @ AF 1kHz 40% deviation)
FSK Error
F3201DEX
2.0% typ. (Digital)
F4201DEX
1.5% typ. (Digital)
External microphone connector 14-pin multi-connector/2.2kΩ
Receiver
Sensitivity 
Analog (at 12dB SINAD)
Digital (at 5% BER)
F3201DEX
0.24μV typ.
–8dBμV emf typ.
F4201DEX
0.22μV typ.
–9dBμV emf typ.
Adjacent channel selectivity
F3201DEX
70/62dB typ. (Narrow/Digital)
F4201DEX
66/57dB typ. (Narrow/Digital)
Spurious response
F3201DEX
85dB typ. (Narrow),
87dBμV emf typ. (Digital)
F4201DEX
75dB typ. (Narrow),
79dBμV emf typ. (Digital)
Intermodulation
F3201DEX
75/67dB typ. (Narrow/Digital)
F4201DEX
74/73dB typ. (Narrow/Digital)
Hum and noise
F3201DEX
43dB typ. (Narrow)
F4201DEX
37dB typ. (Narrow)
Audio output power 400mW typ. (at 5% distortion with 32Ω load)
External speaker connector 14-pin multi-connector/32Ω