Stable, Flexible and High-Performing Repeater
STANDARD PACKAGE INCLUDES
DC power cable connector
2-Year warranty
110 W 100% Duty Cycle Operation
Employing a high performance power amplifier, together with the solid heatsink built into the chassis, the IC-FR9010 series provides a reliable 100% duty cycle operation at 110W* output.
* 110W for VHF, 100W for UHF
P25 Conventional, Analog FM and Mixed Mode
The IC-FR9010 series is compatible with both analog FM mode and P25 digital mode. Program digital and/or analog FM modes per channel. The mixed mode operation allows you to receive both analog FM and P25 digital modes and to transmit either mode depending on the received signal.
500 Memory Channels Capacity
The 4×20-characters display, 16 key buttons, 500 memory channels and internal speaker allow you to use the repeater as a simple base station or to check repeater activity. The bar graph display shows the S-meter level and output power level.
D-SUB 25-pin Accessory Connector
The IC-FR9010 series has a programmable D-SUB 25-pin accessory connector for connecting external remote control devices. Also, modulation/ demodulation signals can be input/output from the D-SUB connector.
Programmable CTCSS, DTCS and NAC
The IC-FR9010 series decodes analog CTCSS and DTCS and digital NAC (Network Access Code) on a per channel basis and downlinks these with the received signal when required.
P25 Conventional Base Mode
As a P25 conventional base mode, the following P25 functions are programmable.
(Conventional base mode only)
- Emergency
- Call alert
- Radio check
- Radio inhibit (Stun)
- Radio uninhibit (Revive)
- Status update
- Status request
- SBC log (Call log)
Other Features
- CW ID transmission
- High reliability, rugged construction
- ±1.5ppm frequency stability (Digital mode)
- Low standby current (280mA)
- P25 self-test mode and key test mode
- Automatic error detection
- 5 color LEDs
- 2U low profile for rack mount
| General |
|---|
|
Frequency coverage
|
IC-FR9010 146–174MHz
IC-FR9020 440–475MHz
|
| Number of channels |
Max. 500 channels |
| Channel spacing |
12.5/20/25/30kHz* |
| Type of emission |
16K0F3E*, 11K0F3E, 8K10F1E/F1D |
| Frequency Stability |
IC-FR9010 ±2.5ppm (W/N), ±1.5ppm (Digital)
±1.5ppm (W/N), ±1.5ppm (Digital)
|
| Antenna impedance |
50Ω (Type-N) |
| Operating temperature range |
-30°C to 60°C; –22°F to +140°F |
| Power supply voltage |
13.6V DC nominal |
| Current drain |
TX
RX |
IC-FR9010
16A (High)
3A/280mA (Max. audio/Stand-by) |
IC-FR9020
18A (High)
3A/280mA (Max. audio/Stand-by) |
|
| Dimensions (W×H×D) |
482×88×413 mm ; 18.98×3.46×16.26 in |
| Weight |
11.0kg ; 24.3lb (approximately) |
| Transmitter |
|---|
| Output power |
IC-FR9010 110W/50W (High/Low) 100% duty cycle
IC-FR9020 100W/50W (High/Low) 100% duty cycle
|
| Max. frequency deviation |
±5.0 kHz/±2.5 kHz (wide/narrow) |
| Spurious emissions |
IC-FR9010 80dB min.
IC-FR9020 76dB min.
|
| FM hum and noise |
55/50dB min. (W/N) |
| Audio harmonic distortion |
3% typ. (60% deviation) |
| Frequency stability |
±2.5ppm |
| Micorophone impedance |
600Ω (8-pin modular) |
| Receiver |
|---|
| Sensitivity |
12 dB SINAD 0.30μV typ.
5% BER 0.30μV typ. |
| Adjacent channel selectivity |
IC-FR9010 82/76dB min. (W/N) 55dB min. (Digital)
IC-FR9020 80/72dB min. (W/N) 55dB min. (Digital)
|
| Spurious response rejection |
IC-FR9010 95dB min. (W/N) 83dB min. (Digital)
IC-FR9020 85dB min. (W/N) 83dB min. (Digital)
|
| Intermodulation rejection |
IC-FR9010 79dB min. (W/N) 79dB min. (Digital)
IC-FR9020 77dB min. (W/N) 77dB min. (Digital)
|
| Hum and noise |
48dB min. (W/N) |
| Audio output power (at 5% distortion) |
7.5W typ. at 5% distortion with 8Ω load |
