Communication can be a difficult challenge when working in a remote area, and the more isolated you are, the tougher it can be. With the Icom F8101 HF Mobile Transceiver, over-the-horizon contacts are a whole lot easier!
The F8101 is designed specifically for long-distance radio communications. It operates on HF frequencies from 500kHz to 29.9999MHz and transmits with up to 125W PEP (Peak Envelope Power). The F8101 supports SSB, AM, CW, and Data operating modes and includes the latest Digital Signal Processor (DSP) technology for improvement in both transmitter and receiver performance. The Clear Talk function utilizes DSP to separate the noise from signals for clearer audio.
When infrastructure is limited or nonexistent, Icom’s F8101 compact, rugged, built to MIL-STD-810-G and water resistant (IP54) radio, is the perfect solution.
STANDARD PACKAGE INCLUDES
RF unit with controller head
Microphone (HM-193)
Microphone hanger kit
External speaker (SP-35L)
DC power cable
Spare fuses
Owner’s manual
Warranty: 2 years
Output power:
|
|
125W |
ALE:
|
|
2G |
RX Frequencies:
|
|
0.5-29.9999MHz |
Addresses:
|
|
500 Selcall; 500 ALE |
ALE (Automatic Link Establishment)
The built-in ALE system automatically selects the best channel and establishes a communication link. ALE provides interoperability with other 2G ALE radios using MIL-STD-188-141B and FED-STD-1045A ALE standards. ALE individual call, net call, sounding, AMD (Automatic Message Display), and LQA (Link Quality Analysis) polling are available.
Selcall (Selective Calling)
The F8101 provides CCIR493-4 based 4-digit and 6-digit open standards Selcall, widely used in HF networks and HF calling systems. Supported Selcall functions include selective calling, phone call, message call, position call, status call, emergency call, and channel test call. For security, the owner password enabled stun feature can remotely disable the radio operation and the radio can be GPS tracked.
User-Friendly Operation
The F8101 is designed for simple, straightforward operation. The Administrator/User feature can limit the functions that are accessed by the User. The Administrator can enter the operating frequency and assign memory channels from the front panel or the remote control microphone.
The following functions can be assigned to the [I], [II], and [III] soft key buttons: Main menu, Manager menu, Set mode, Selcall address list, RX history, and TX history.
Function button menus are shown at the bottom of the display.
Additional Features
- Optional cooling fan for full duty cycle in data and voice mode operations
- BITE (built-in test equipment) function
- Clear talk using DSP
- Mute functions
- GPS receiver connection
- USB port for PC connection
- ±0.3ppm frequency stability (–30˚C to +60˚C)
- PTT tune function automatically starts tuning when the PTT button is pushed.
- TX Power protection (PA unit high temperature, high SWR, low battery)
- Display mode: SWR, voltage, clock, GPS position, direction, and elevation
- FCC part 90 compliant
| General |
|---|
| Frequency coverage |
Receive: 0.5–29.9999MHz,
Transmit: 1.6–29.9999MHz |
| Type of emission |
J3E, A3E, A1A, F1B, J2B
|
| Number of channels |
500 channels |
| Number of addresses |
Selcall 500 channels, ALE 500 channels |
| Operating temperature |
–30°C to +60°C; –22°F to +140°F |
| Frequency stability |
±0.3ppm (at –30°C to +60°C) |
| Power supply requirement |
13.8V DC Negative ground 11.73–15.87V |
| Antenna impedance |
50Ω (SO-239) |
Current drain
Receive
Transmit |
Less than 3A (Max. audio), 1.0A (Stand-by)
Less than 28A (Maximum output) |
Dimensions
(W×H×D)(Projections not included) |
174×62×259 mm; 6.85×2.44×10.2 in (Controller attached type) |
| Weight (approx.) |
3.9kg; 8.6lb (Controller attached type) |
| Transmitter |
|---|
|
Output power
J3E/A1A
A3E
F1B/J2B
|
125, 50, 10W PEP (typical)
30, 12.5, 3W (typical)
75, 50, 10W PEP (typical) |
|
Spurious emissions
|
64dB typical below PEP
|
|
Carrier suppression
|
50dB below PEP
|
Unwanted sideband
400Hz
1kHz |
55dB below PEP
65dB below PEP |
|
3rd IMD
|
25dB below PEP
|
Duty cycle
Normal conversation
Data mode
All modes with CFU-F8100
|
(at 14.1MHz, 25°C)
100% (at –30°C to +60°C)
25%* (at –30°C to +30°C)
100% (at –30°C to +45°C)
*Maximum 5 minute continuous transmission. |
| Receiver |
|---|
|
Sensitivity (at 10dB S/N)
J3E (Pre-amp. ON)
A3E
|
0.5–1.5999MHz
14dBμV
22dBμV |
1.6–29.9999MHz
–14dBμV
6dBμV |
|
Squelch sensitivity
J3E (at 13.5MHz)
A3E (at 1.000MHz)
|
Threshold
Less than +20dBμV
Less than +30dBμV
|
Tight
Less than +90dBμV
Less than +110dBμV
|
|
Selectivity
J3E
A3E
|
2.4kHz/–6dB
6kHz/–6dB
|
3.8kHz/–60dB
15kHz/–60dB
|
|
Spurious response
|
More than 70dB
|
|
Audio output power
|
4.0W at 10% distortion with a 4Ω load
|
|
Clarifier
|
±200Hz
|
